Vertical sagging – PS 41G is used for vertical sealing joints. Pourable & self-levelling – PS 42P is used for horizontal joint sealing. Curing – Cures at ambient temperature. Elasticity – High elasticity and forms tough seal. Adhesion/Bonding - Bonds strongly to a wide range of building materials. Cyclic Movements - Accommodates continuous and pronounced cyclic movements. Shrinkage - Negligible. UV & Ozone resistance - Resistant to sunlight (UV rays) and ozone. Biodegradation - Good resistance to bio-degradation Chemical resistance - Resistant to occasional spillage of dilute acids, alkalis, petrol, aviation fuels, diesel, kerosene, lubricating oils etc. Toxicity - It is Non-toxic.

Reduces the failure due to heterogeneity while imperfect mixing Cures by absorption of moisture from air, (no external curing is required) at ambient temperature with humidity Excellent adhesion to concrete, brick work, painted wood, glass, glazed surfaces, aluminum, stainless steel, steel & plastic like polyester & PVC, benefits variety of application & hermatic sealing Does not sag or flow down in the joint.

Ready to use – One component pasty sealant to be used directly from the pack. Easy application – Soft consistency paste hence easy to apply. Suitability of application - Suitable for indoor & outdoor applications. Non-sagging – Non- sagging and ideal for vertical application. Eco-friendly – Water based, no organic volatile matter and thus eco friendly. Multipurpose - Suitable for different substrates like concrete, wood, PVC and aluminum. Paintability - Water based & solvent-based paints can be used. Repairability – Old sealant (aged) can be repaired with fresh material. Recovery – Excellent recovery after extension, so performs well in cracks & construction joints. Staining – Does not stain cementitious substrates after application. Surface finish – Very smooth surface finish.

Dr. Fixit Silicone Sealant A single component silicone sealant which when properly cured becomes a permanently elastic compound Can withstand high temperature extremes and provides excellent adhesion to glass, ceramics and sanitary ware. ● Ready to use - No mixing is required, directly applicable through cartridge. ● Sagging – It is completely non-sagging in nature. ● Flexibility – Tough & flexible after curing so performs well during expansion & contraction ● Curing – Cures by moisture absorption from air at ambient temperature & relative humidity. ● Plastic deformation – Up to 95% recovery after plastic deformation ● UV resistant - Good UV resistance & insulation properties ● No primer is required when sealing joints in glass, ceramics and vitreous surfaces ● Anti - fungi .